• 09:00 - 18:00

  • 星期一 - 星期五

下載產品目錄

Download PDF
*
 

一般動態壓力規


DYNAMIC PRESSURE SENSORS


1.General Purpose
2.High Sensitivity
3.High Frequency
4.Shock Wave / Blast / Explosion
5.Ballistics
6.Engine Combustion
7.High Temperature
8.Cryogenic
9.Sub-Miniature
10,Rocket Motor
11.Intrinsically Safe Sensors
12.Heavy-Duty Industrial
13.Power Generation
14.Automotive Test

PCB's dynamic pressure sensors utilize piezoelectric sensing technology and feature extremely fast rise times due to their inherent stiffness. Each sensor encompasses wide dynamic amplitude and frequency ranges and is uniquely suited for measuring small fluctuations in the presence of high static pressures.
 

GENERAL PURPOSE DYNAMIC ICP® PRESSURE SENSORS


  • Variety of mounting configurations with probe, adaptor, and clamp nut components
  • Welded, hermetically sealed, stainless steel construction
  • Extremely fast response with resonant frequencies to 500k Hz
Typical Series 111,112 and 113 Probe Style Sensors Straight Thread and Pipe Thread Adaptors Probe Style Sensor Threaded Adaptor
Ranges from 50 psi to 20k psi FS 3.5bar to 1380 bar FS Resolution to 0.001 psi (0.00007bar) Resonant frequency to 500k Hz Permit installation of probe style sensors into a varieyt of pressure ports installed into thread adaptor with lock nut for flush mount installations

爆衝壓力規


EXPLOSION, BLAST, AND SHOCK WAVE PRESSURE SENSORS

  • Free-Field Blast
  • Underwater Blast
  • Closed Bomb Tests
  • Shock Wave and Time-of-Arrival
  • Shock Tube Research
  • Detonations
  • Atmospheric Re-Entry Studies
*
 
Series 137 Free-Field Blast Pressure Probes Series 138 Underwater Blast Pressure Probes  
Ranges from 50 psi to 5000 psi FS
3.5bar to 350bar FS
Rise time ‹4 μspc
Resonant frequencies beyond 500k Hz
Ranges from 1000 psi to 50k psi S
70bar to 3500 bar FS
Rise time ‹1.5 μspc
Resonant frequencies beyond 1M Hz
 

 

AUTOMOTIVE AND ENGINE PRESSURE TEST SENSORS

  • Engine Combustion
  • Cylinder Compression
  • Fuel Injection
  • Intake and Exhaust Pulsations
  • Knock / Timing
  • Braking Systems
  • Rocket Engines
  • Aircraft Engines
Series 116B High Temperature, High Sensitivity Pressure Sensor Model 105C43 Fuel Injection Pressure sensor Series 105 Miniature ICP® Pressure Sensors
Suitable for exhaust pulsation studies   Diaphragms as small as 0.099 inch
Ranges from 100 to 30K psi FS
Sutable for injector and steering system
Pulsation studies

HIGH INTENSITY ACOUSTICS, HYDRAULICS, AND PNEUMATICS

  • Jet Engine Noise
  • Pump and Compressor Monitoring
  • Water Hammer Detection
  • HVAC Equipment
  • Air Turbulence
  • Pressure Pulsations and Surges
*
Series 103 Microphones Model 106B High Intensity, ICP® Sound Pressure Sensor Series 123 and 124 Rocket Engine Test Sensors Series 121A Industrial Pressure Sensors
Flutter testing
High intensity acoustic studies
Wind tunnel testing
Measures low pressure
acoustics in pneumatic and hydraulic environments
Water-cooled
Helium-cooled
For qualification and stability testing
Rugged design
Suitable for detecting pumping pulsationgs and water hammer problems



靜態壓力測量

PRESSURE TRANSDUCERS AND TRANSMITTERS

  • Monitor Heavy Equipment and IndustrialProcesses for Feedback and Control Purposes
  • Acquire Precise Data for Research, Development, and Laboratory Test Applications
  • Check the Performance of Distribution Stations, HVAC Equipment, and Hydraulic Systems
  • Obtain Accurate Liquid-Level / Depth Measurements in Tanks, Reservoirs, Sumps, and Bore Holes

PCB's pressure transducers and transmitters utilize a highly stable,atomically-fused, thin-film sensing element without use of adhesives or fluid filling. The result is a robust sensor that possesses the accuracy necessary for rigorous testing requirements yet is economically attractive for use in process control applications.

*
*

SERIES 1500 PRESSURE TRANSDUCERS AND TRANSMITTERS

  • Amplified 0-5 VDC and 0-10 VDC outputs
  • Loop-powered 4-20 mA versions
  • Ranges from 0-10 to 0-6000 psi full scale
  • Gage, absolute, or compound pressure versions
  • Accuracies of 0.1%, 0.25%, or 0.5% full scale
  • All-welded construction
  • No adhesives or fluid filling
  • Temperature range of -40 to +250 °F (-40 to +125 °C)
  • 17-4 stainless steel wetted parts
  • Variety of connectors and submersible cables
  • Variety of process fittings
 如欲瞭解及查詢更詳盡的資料,請連結至原廠網站 http://www.pcb.com
  檔案大小:0K